LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 V6-2.7L VIN R >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Diagrams >> Diagnostic Aids >> Troubleshooting Tests >> Testing For Continuity

Testing For Continuity






STANDARD PROCEDURE - TESTING FOR CONTINUITY




1. Remove the fuse (1) for the circuit being checked or, disconnect the battery.

2. Connect one lead of the ohmmeter to one side of the circuit being tested.

3. Connect the other lead to the other end of the circuit being tested. Low or no resistance means good continuity.
scientia non olet · About LEMON Manuals