1270-01
1270-01 BCM NOT PROGRAMMED
- When Monitored: Continuous with the Ignition on.
- Set Condition: An attempt to read the internal BCM coding failed.
Diagnostic Test
1. BODY CONTROL MODULE (BCM)
NOTE: This DTC indicates an internal BCM fault.
With the DRBIII(R), read and record the BCM DTCs and then erase the BCM DTCs
Perform 3 ignition key cycles, leaving the ignition key on for a minimum of 30 seconds per cycle.
With the DRBIII(R), read the BCM DTCs.
Did this DTC set again?
Yes
- Replace the Body Control Module.
- Perform BODY VERIFICATION TEST. Body Verification Test.
No
- The condition that caused this DTC to set is currently not present.
- Perform BODY VERIFICATION TEST. Body Verification Test.
-