Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair >> Sentry Key Remote Entry Module - Removal >> Remote Keyless Entry Module

Remote Keyless Entry Module






REMOTE KEYLESS ENTRY MODULE





1. Disconnect the negative battery cable.

2. Remove the Instrument Cluster.

3. Disconnect the 2-pin CAN BUS harness connector (1) from the SKREEM module.

4. Disconnect the 2-pin harness connector for the sentry key antenna ring.

5. Disconnect the 18-pin harness connector (1) from the SKREEM module.

6. Press the retaining tabs apart.

7. Remove the SKREEM module from the base plate.
pro multis · About Operation CHARM