Instrument Panel (Top Section)

INSTRUMENT PANEL (TOP SECTION)





NOTE: Observe the uniform gap of the instrument panel in relation to the driver and passenger door trim panels.


NOTE: When installing, check for proper installation of the insulating mat, sheet metal clips and expanding anchors.

1. Install the top section (1) to the vehicle.




2. Install the sheet metal clips (1) on left and right A-pillars.




3. Install the bolts (1) on left and right under the defroster grille.




4. Position the defroster grille (2) and install the screws (1).




5. Install the screws (1) to the glove compartment attaching it to the top section.




6. Install the screws (1) on left and right of the instrument panel located on the inside of the fuse cover and the I/P cover.

7. Install the screws (2) located behind the air deflectors.

8. Install both right and left air deflectors.




9. Install the fuse cover (1) on the left and the I/P cover on the right.




10. Install the A-pillar trim (1).