Lower I/P Panel - RHD

LOWER I/P PANEL - RHD




1. Guide the handle through the lower panel as you install the lower I/P (2) into the cluster bezel (1).




2. Install the screw attaching the hood latch release handle bezel to the lower I/P.




3. Install the screws (1 - 4) in the lower I/P.




4. Install the screw (2) attaching the lower I/P panel to the cluster bezel.

5. Install the illumination control module into the I/P, then connect the illumination control module harness connector.

6. Install the two screws (4) attaching the lower I/P to the illumination control module and the screw (3) on the side of the I/P to the illumination control module support bar.

7. Install the fuse panel side cover.

8. Install the steering column panel then install the screw (5) attaching the steering column panel under the steering column.

9. Install the right side I/P air outlet deflector (1).