Top Catch

TOP CATCH




1. Attach the top catch to the front bow (2). Install, but do not tighten, the screws (1).




2. Position the top catch (1) so that the inside edge of the hook is 368 mm (14.5 in.) from the inside edge of the alignment post (2). Tighten the screws to 10 Nm (89 in. lbs.).

3. Connect the linkage assembly to the top catch.




4. Install the top catch cover (2) to the front bow (3). Tighten screws (1) to 5 Nm (44 in. lbs.).

5. Raise the convertible top and check for proper alignment. If any adjustments are necessary.