Latch Retainer

LATCH RETAINER





NOTE: Right side shown, left side similar.

1. Lower the convertible top.

2. Remove the upper windshield trim panel.

3. Remove both A-pillar trim panels. Refer to Trim Panel.

4. Remove both sun visors.

5. Remove the dome lamp assembly.

6. Remove the lower windshield trim panel and disconnect the universal transmitter harness connector.

7. Disconnect the latch retainer switch harness connector (5) (right side only).

NOTE: Be sure to retain the shim(s) that are removed when the latch is removed. These shims must be reinstalled during assembly.

8. Remove the latch retainer bolts (4) and remove the shim(s) (3) and retainer (2) from the windshield header (1).