Operation CHARM: Car repair manuals for everyone.

Manually Raise Top






MANUALLY RAISE TOP




1. Lower the windows and open the doors.

2. Insert the multifunction tool (supplied with vehicle) into gap in front of the tonneau cover and rotate counterclockwise until the tonneau cover is released.

3. Lift the tonneau cover up and support in the vertical position.





NOTE: Do not let go of the convertible top as it may fall back into the cargo compartment area.

4. Pull up on the upper section of the convertible top to move it out of its storage area until top is fully extended.




5. Lift the rear bow until it is in its vertical position.

CAUTION: The tonneau cover flaps will automatically extend while lowering the tonneau cover. The flaps can be damaged if not allowed to extend automatically.

6. Lower the tonneau cover.




7. Insert the multifunction tool (supplied with vehicle) into gap in front of the tonneau cover and rotate clockwise until the tonneau cover is locked.




8. Lower the rear bow into the tonneau cover.




9. Open the decklid and lock the rear bow by inserting an allen wrench into the rear bow latch (1) and turning counterclockwise.




10. Fold down the release handle.

11. Turn the release just past one quarter turn clockwise and pull the convertible top frame carefully down until it meets the windshield header attachment points.




12. Turn the release handle counterclockwise to the stop in order to lock the convertible top.

13. Fold the latch handle up. The convertible top is now locked onto the windshield header.




14. Open the decklid and lock the rear bow by inserting an allen wrench into the rear bow latch (1) and turning clockwise.