Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Radiator >> Service and Repair >> Removal and Replacement >> Installation

Installation






INSTALLATION




1. Carefully lower the radiator into the vehicle.
2. Connect the lower radiator hose (2).
3. Connect the coolant recovery reservoir hose (1).
4. Install the transmission cooler line (3) (automatic transmission only). Tighten the line to 10 Nm (89 in. lbs.).




5. Connect the upper radiator hose (1).




6. Connect the transmission cooler line (1) located in the middle front of the vehicle (automatic transmission only).




7. Using a suitable tool (1) install the radiator retaining clamps (2).




8. Install the two condenser retainer bolts (1) into the radiator support. Tighten the bolts to 10 Nm (89 in. lbs.).




9. Install the radiator fan.
10. Install the air inlet tubes.
11. Refill the cooling system.
12. Connect the negative battery cable.
13. Start the engine and check for coolant leaks.
14. Recheck the coolant level.
pro multis · About Operation CHARM