Piston and Connecting Rod - Removal

REMOVAL

1. Remove the timing chain.




2. Mark the connecting rods and rod caps (1) for reassembly.
3. Mark the pistons facing direction if arrows are not visible.




4. Remove the connecting rod bolts (1) and the connecting rod caps.




5. Remove the pistons and connecting rods from top of the engine.




6. Perform work on a suitable surface to prevent damage to parts.
7. Keep the piston pins matched to the pistons.
8. Remove the snap rings from the pistons (2).
9. Press out the piston pins (1).
10. Remove the piston from the connecting rod (3).
11. Inspect all parts to be reused for damage. Replace as required.