Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Installation

Installation






INSTALLATION




1. Install the relay control module harness connectors to the relay control module (1).

2. Install the relay control module into the control module box, pushing the relay control module down until the clips snap into place.

3. Install the control module box lid.

4. Connect the negative battery cable.
pro multis · About Operation CHARM