Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Removal

Removal






REMOVAL




1. Disconnect and isolate the negative battery cable.

2. Open the lid to the control module box.

3. Move the wires away to the side of the box to access the clip (1) that holds the relay control module in the control module box.

4. Push the clip (1) back away from the relay control module and lift the relay control module out of the control module box.

5. Remove all of the relay harness connectors from the relay control module.
pro multis · About Operation CHARM