Installation

INSTALLATION

WARNING: WHEN WORKING ON THE POWER WINDOWS OR THE WINDOWS IN THE VEHICLE DOORS, THE UNSECURED WINDOW CAN FALL DOWN AND CAN CAUSE INJURY BY PINCHING HANDS.






CAUTION: Secure the window against falling down.

1. Install the window (5) by inserting it downward while guiding the slider through the opening in door shaft.

2. Tighten the mounting bolts (2-4). Tighten to 9 Nm (79 in. lbs.)

3. Connect the connector for the power window motor (3).

4. Install the door foil on the inner door.




5. Install the door speaker (1). Tighten to 4 Nm (35 in. lbs.)




6. Install the outer window sealing rail by pressing the sealing rail onto the window shaft uniformly. Then install the expanding anchor clip. Install the plastic cover on the escutcheon, then install the rubber door seal. Install the chrome cover by installing the two screws (1).

7. Install the inner window sealing rail by pressing the sealing rail on the inner door.

8. Adjust the door glass and clean.

9. Install the door trim panel.