Installation

INSTALLATION





1. Install the pivot end of the wiper arm (2) on the wiper pivot shaft.

2. Install the wiper arm attachment nut (1) finger tight.





3. Carefully set the wiper arm down so the wiper blade touches the glass surface.

4. Align the center of the wiper blade (2) with the top of the dot matrix (1) on the bottom of the windshield. Torque the wiper arm retaining nut to 19 Nm (14 ft. lbs.).





5. Press the plastic nut cap (1) into the wiper arm (2) to cover the wiper arm attachment nut.





6. Press the hood prop release button (1) and lower the hood prop outer sleeve (2), then close the hood.