Clutch: Service and Repair

1. Remove transmission as outlined under "Manual Transaxle, Replace" procedure.
2. Mark relationship between clutch cover and flywheel for reference during reassembly, then insert suitable clutch disc aligning tool through clutch disc hub.
3. Gradually loosen clutch cover attaching bolts, then remove pressure plate and cover assembly and disc from flywheel.
4. Remove clutch release shaft and slide release bearing assembly off input shaft seal retainer. Remove fork from release bearing thrust plate.
5. Reverse procedure to install. Align reference marks made during reassembly. Using clutch disc alignment tool, install disc, plate and cover to flywheel and torque bolts to 21 ft. lbs.