Carter Model BBD 2 Barrel Carburetor

Fig. 12 Concealment plug removal. 1984 carburetor:

1984 MODELS
1. Remove air cleaner, then disconnect all hoses from front of carburetor base.
2. Center punch at a point 1/4 inch from end of mixture screw housing.
3. Drill through at punch marks using a 3/16 inch drill bit, Fig. 12.
4. Repeat steps 2 and 3 on opposite side.
5. Pry out concealment plugs and save for reuse, then install hoses and air cleaner.