Wheel Hub: Service and Repair

EXC. 1987 8 PASSENGER CARAVAN & VOYAGER & EXTENDED WHEELBASE MINI RAM VAN

Fig. 10 Hub removal:

Fig. 11 Removing bearing from knuckle:

Removal
1. Remove steering knuckle as previously outlined.
2. Remove hub using tool No. C-4811.
3. Remove three bearing retainer to knuckle attaching screws, then the bearing retainer.
4. Pry bearing seal from machined recess in knuckle assembly.
5. Remove bearing from knuckle using tool No. C-4811.

Fig. 12 Installing bearing into knuckle:

Fig. 13 Installing hub into knuckle:

Installation
1. Press new bearing into knuckle using tool No. C-4811.
2. Install bearing retainer. Torque retainer attaching screws to 20 ft. lbs.
3. Press hub into bearing using tool No. C-4811.
4. Position new seal in recess, then install using tool No. C-4698 or equivalent.
5. Install steering knuckle as described under "Steering Knuckle, Replace."