4 Wheel Drive

Fig. 1 Exploded View Of Front Suspension Assembly:

1. Raise and support vehicle.
2. Remove engine undercover.
3. Remove knuckle assembly as outlined under STEERING SUSPENSION CHASSIS AND BODY COMPONENTS/FRONT SUSPENSION.
4. Remove drive axle refer to Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft, Conventional Fixed/Floating/Service and Repair.
5. Remove inner shaft refer to Transmission and Drivetrain/Differential/Differential/Axle Housing/Service and Repair.
6. Remove front propeller shaft.
7. Support differential assembly and remove lefthand differential bracket.
8. Disconnect front suspension crossmember then remove differential carrier and suspension crossmember assembly.
9. Reverse procedure to install