15000 MI or 24000 KM

Lubricate
    Universal Joint, Drive/Propeller Shaft
    Control Arm
    Ball Joint
Check
    Brakes and Traction Control
      Check brake linings, hoses & lines, wheel & master cylinders, brake fluid.
Inspect
    Valve Clearance
      Inspect & adjust valve clearance.
    Vacuum Pump
      Inspect vacuum pump oil hoses and replace if necessary.
    Turbocharger
      Inspect turbocharger air intake hose and replace if necessary.
    Power Steering Line/Hose
    Exhaust System
    Drive Belt
      Inspect and adjust water pump and alternator only.
    Cooling System
      Service as required.
Replace
    Oil Filter, Engine
    Fuel Filter
    Fluid - Differential
      Change lubricant if equipped with Limited Slip.
    Engine Oil
      If your mileage is less than 7,500 miles (12,000 km) yearly, replace the engine oil filter at each oil change.
    Clutch Fluid
      Change hydraulic clutch fluid.
Clean/Repack
    Wheel Bearing
      Clean and repack front wheel bearings. Inspect for leaks. Also inspect and repack whenever rotors are removed.
Flush
    Coolant
      Drain, flush, and refill engine coolant.