2.2L-2V Federal & California Altitude Emission Package
2.2L-2V FEDERALALTITUDE EMISSION PACKAGE PN 4411980
Contains the following parts:
PART
ITEM QTY. NUMBER
Primary Main Jet (#211) 1 4293797
Secondary Main Jet (#215) 1 4240006
Primary High Speed Bleed (#180) 1 4131128
Secondary High Speed Bleed (#210) 1 4397708
VECI Update Label 1 4275084
3-A - SERVICING PRIMARY MAIN METERING JET:
REPAIR PROCEDURE
A. ^ Remove primary metering jet and install new jet #211, PN 4293797 (Figure 3-A).
3-B - SERVICING SECONDARY MAIN METERING JET:
^ Remove secondary metering jet and install new jet #215, PN 4240006 (Figure 3-B).
3-C - SERVICING PRIMARY HIGH SPEED BLEED:
^ Remove primary high speed bleed and install new bleed #180, PN 4131128 (Figure 3-C).
3-D - SERVICING SECONDARY HIGH SPEED BLEED:
^ Remove secondary high speed bleed and install new bleed #210, PN 4397708 (Figure 3-D).
B. Reset fast idle specification as follows:
Transmission Specification
M-5 1500 RPM (Step 3 of the cam)
Automatic 1650 RPM (Step 3 of the cam)
All speeds and timing remain the same except as noted above. Check and reset as required.
C. Type "This vehicle has been modified with Altitude Emission Package PN 4411980" and appropriate new specifications on the VECI Update Label.
D. Affix VECI Update Label, PN 4275084, near original VECI label.
2.2L-2V CALIFORNIA
ALTITUDE EMISSION PACKAGE
PN 4411981 (MANUAL)
PN 4411982 (AUTOMATIC)
Contains the following parts:
MANUAL KIT AUTOMATIC KIT
ITEM QTY. (PN 4411981) (PN 4411982)
Carburetor 1 4324607 4324608
EGR Valve 1 4287426
Altitude Compensator 1 4306202 4306202
Vacuum Harness 1 4287006 4287006
Screw (for mounting 2 6032468 6032468
altitude compensator)
VECI Update Label 1 4275084 4275084
REPAIR PROCEDURE
A. Remove original carburetor and install new carburetor. Remove original EGR valve and install new EGR valve (manual only).
FIGURE 4:
B. Install altitude compensator on the dash panel behind the engine. The mounting location should be slightly above and to the right of the carburetor (Figure 4).
C. Install vacuum harness and hook-up as shown in Figure 4.
D. Check idle specifications and reset if necessary.
E. Type "This vehicle has been modified with Altitude Emissions Package PN 4411981 or PN 4411982" on the VECI Update Label.
F. Affix VECI Update Label, PN 4275084, near original VECI label.