Sliding Door

REMOVAL

Sliding Door Power Lock Components:

1. Remove door trim panel. Service and Repair
2. Remove eight (8) control assembly to door mounting bolts.
3. Disconnect the lock linkage and the wiring harness.
4. Pull the control assembly out of the sliding door.
5. Disconnect the lock linkage from the lock motor and remove the lock motor from the control assembly.



INSTALLATION

1. Mount the lock motor to the control assembly and connect its lock linkage.
2. Connect the wiring harness and the lock linkage to the sliding door.
3. Install the control assembly into the sliding door.
4. Install and tighten the eight (8) control assembly mounting bolts.
5. Install the door trim panel. Service and Repair