120000 MI or 192000 KM

Lubricate
    Universal Joint, Drive/Propeller Shaft
    Suspension
      Lubricate suspension bushings with fittings.
    Ball Joint
       With grease fittings only.
Inspect/Adjust
    Valve Clearance
      Adjust jet valve only on 2.0L/2.6L engines.
    Ignition Timing
Clean
    Carburetor
      Clean and inspect choke and linkage.
Check
    Power Steering Fluid
      Check fluid level. Also inspect hoses.
    Oxygen Sensor
      Except 88-89 California.
    Ignition Rotor
      Except California
    Ignition Cable
      Except 1989 California models
    Fluid - Differential
      Check fluid level.
    Distributor, Ignition
      Except California
    Distributor Cap
      Except California
    Distributor Advance Unit
      Except California
    Brakes and Traction Control
      Check linings, hoses, wheel cylinders, master cylinder and brake fluid.
    Brake Master Cylinder
      Check fluid level.
Inspect
    Wheel Cylinder
    Vacuum Harness HVAC
      Inspect and replace as necessary.
    Positive Crankcase Ventilation
      Inspect & clean crankcase emission system.
    Hoses
      Inspect and replace as necessary.
    Heating and Air Conditioning
    Exhaust System
    Evaporative Emissions System
    Emission Control Systems
      Inspect and clean.
    Brake Shoe
    Brake Pad
    Brake Hose/Line
    Air Injection
      Except 85-88 California.
Replace
    Timing Belt
    Spark Plug
    Oil Filter, Engine
      4Wd every 50 hours for off road driving.
    Fuel Filter
    Fuel Filler Cap
    Fluid - M/T
    Fluid - Differential
      Limited Slip Differential Only.
    Fluid - A/T
      2WD vehicles. 4WD vehicles only.
    Filters
      Replace vacuum control system solenoid valve air filter.
    Evaporative Emission Control Canister
      Replace if applicable..
    Engine Oil
      If your mileage is less the 7,500 miles a yearly, replace the engine oil filter at each oil change.
    Drive Belt
      Replace water pump and alternator belts.
    Brake Fluid
    Air Filter Element
Clean/Repack
    Wheel Bearing
      Inspect for leaks. Clean, inspect and repack front wheel bearings whenever rotors are removed.
Flush
    Cooling System
      Drain, flush and replace engine coolant.