Brake Lamps/Cruise Control - Stay ON/Inoperative

87chrysler12

Models


1987 "B" Van/Wagon With H.D. Brakes


Subject


Speed Control Does Not Work, Brake Lights Stay On


Index


ELECTRICAL

Date


June 15, 1987

No.


08-16-87 (C20-08) P-2098
NOTE: THIS BULLETIN ONLY APPLIES TO "B" MODEL VANS/WAGONS EQUIPPED WITH HEAVY DUTY BRAKES AND TRANSVERSE BRAKE BOOSTER.

SYMPTOM/CONDITION

Speed control inoperative and/or brake lamps stay on after brake pedal is released.

DIAGNOSIS

Verify that vehicle is equipped with a transverse brake booster and the brake lamp switch is of the self-adjusting type (PN 4360148).

PARTS REQUIRED

1 Switch PN 4221980
1 Bracket PN 4169578
1 Nut PN 0107825

REPAIR PROCEDURE

This repair involves the installation of a new, manually adjusted bracket lamp switch and bracket.

1. Remove the existing brake lamp switch, retaining clip, and bracket.

2. Install the new brake lamp switch, PN 4221980; bracket, PN 4169578; and nut, PN 0107825.
3. Adjust the brake lamp switch as outlined on page 5-4 of the 1987 Rear Wheel Drive Van/Wagon Service Manual, publication #81-370-7007.


POLICY: Reimbursable within the provisions of the warranty


TIME ALLOWANCE
Labor Operation No. 08-80-84-01 . . . . . . . . . . . . 0.3 Hrs.

Refer to existing Labor Operation Time Schedule


FAILURE CODE: 07 - Binds, Sticks, or Seized