2.2L-2V Federal and California N-Body (HCR2.2T2HFL7 and HCR2.2T2HFZ2)

ALTITUDE EMISSION CHANGES REQUIRE THE FOLLOWING PARTS AND PROCEDURES:


ITEM QUANTITY MANUAL

Carburetor 1 4324754
Altitude Compensator 1 4306202
Vacuum Harness 1 4300249
Screw (for mounting 2 6032468
altitude compensator)
VECI Update Label 1 4275084

All parts to be ordered separately.

REPAIR PROCEDURE

1. Remove original carburetor and install new carburetor, PN 4342754.

FIGURE 4B:

2. Install altitude compensator, PN 4306202, on the dash panel behind the engine.

The mounting location should be slightly above and to the right of the carburetor (Figure 4B).

3. Install vacuum harness, PN 4300249, and hook up as shown in Figure 4B.
4. Check idle specifications and reset if necessary.

5. Type "This vehicle has been modified to meet Altitude Emission Standards" on the VECI Update Label, PN 4275084, and affix near existing VECI Label.