Truck

1. Torque adjusting nut to 360-480 inch lbs. for Vans, Wagons and Front Sections or 90 inch lbs. for Ramcharger, Trail Duster and Conventional Cabs while rotating wheel.
2. Stop wheel from rotating, then back off adjusting nut to completely release bearing preload.
3. Tighten adjusting nut finger tight, then install locknut and cotter key. End play should be 0.0001 to 0.003 inch.
4. Clean grease cap, coat inside with suitable wheel bearing grease and install cap. Do not fill cap with grease.