B Checking Speed Control Inputs to the SMEC

1. With DRB II connected, put system into sensor test 09. Ensure speed control switch is in Off position.
2. Observe DRB II display, move speed control ON/OFF switch to the On position. Record display readings.
3. Observe DRB II display, then press the set button. Record display readings.
4. Observe DRB II display, then press the resume button. Record display readings.
5. If display readings indicate 00-On, 10-Set and 01-Resume proceed to Test 3, Step A.
6. If display readings indicate Blank-On, Blank-Set and Blank-Resume proceed to Test 4, Step A.
7. If display readings indicate Blank-On, 10-Set and 101-Resume proceed to Test 5, Step A.
8. If display readings indicate 00-On, 00-Set and 00-Resume proceed to Test 6, Step A.