Console: Service and Repair

EXTENDED CONSOLE

Mounting Brackets:

1. Install forward and rear mounting brackets with four screws.
2. Attach rear console, first making sure headliner is between housing and upper plastic.

Mounting Console Assembly:

3. Slide console rearwards until console stops.
4. Attach vent switch wire harness to vent switch carrier.
5. Attach main wiring harness into compass module.

Connecting Harness:

6. Press console to headliner, centering console between visor tip pin retainers.
7. While pressing console upwards, slide console forward to attach console on front mounting tang.

Installing Console Assembly:

8. Press upwards until consoles snap onto mounting bracket.

SHORT CONSOLE
1. Install forward and rear mounting brackets with four screws.
2. Attach vent switch wire harness to vent switch carrier.
3. Press console to headliner, centering console between visor tip pin retainers.
4. While pressing console upwards, slide console forward to attach console on front mounting tang.
5. Press upwards until console snaps onto mounting brackets.