Mopar Bond All GEL (Pn 4467709)

Mopar Bond All Gel is a rapid curing instant adhesive gel with excellent humidity and weather resistance. The gelled adhesive will not run or drip and will easily bond rubber, plastics, textiles, cloth, and metals.

INSTRUCTIONS FOR USE

1. Thoroughly clean and dry the area(s) to be bonded with Mopar Brake and Carburetor Cleaner (PN 4318037) or equivalent, or use a swab soaked with isopropyl alcohol.

2. Carefully apply Mopar Bond All Gel to one surface. Use only one drop per square inch of surface. Bonding will not take place if too much adhesive is used.

3. Press parts together immediately and apply pressure for 15 seconds, or until bond sets. Mopar Bond All Gel works with humidity. In extremely low humidity conditions, bonding may take slightly longer.

SUGGESTED APPLICATIONS FOR MOPAR BOND ALL GEL

Securing Vinyl Trim Rubber Impact Strips

Dashboard Accessories Securing Weather Stripping

Repair of Torn Vinyl Upholstery Attachment of Plastic Knobs to Steel
Shafts

Attachment of Small Plastic Parts

Mopar Bond All Gel will work with the following materials:

Metals Plastics

Rubber Laminated Plastic

Leather Paper

Wood Textiles

APPLICATIONS NOT RECOMMENDED

Rear View Mirror Buttons Glass Bonding

Styrofoam Foam Rubber

Polyethylene Polypropolene

DO NOT USE IN AREAS EXCEEDING 200~F.