24000 MI or 38400 KM

Lubricate
    Universal Joint, Drive/Propeller Shaft
      Lubricate front axle drive joint and spindle pivot bearings.
    Steering
    Spindle
      With 44F-BJ & 60F front differentials. Inspect and lubricate front spindle needle bearings. Also service when replacing disc pads.
    Drive/Propeller Shaft
    Body and Frame
      Lubricate body & brake actuating mechanisms.
    Ball Joint
Check
    Brakes and Traction Control
      Inspect brake linings.
Inspect
    Transfer Case
      Inspect fluid level.
    Power Steering Fluid
      Inspect fluid level. CB & MB 350 models require Hydroboost Power Steering Fluid.
    Manual Transmission/Transaxle
      Inspect fluid level.
    Heating and Air Conditioning
    Fuel Delivery and Air Induction
      Inspect air intake hoses.
    Exhaust System
    Differential Assembly
      Check for leaks.
    Crankcase Filter
      Clean/oil crankcase inlet air filter.
    Cooling System
    Clutch Fluid
      Inspect fluid level.
    Carburetor
      Inspect and clean carburetor choke shaft, fast idle cam & pivots.
    Brake Hose/Line
    Brake Fluid
      Inspect fluid level.
    Air Injection
      If equipped.
Replace
    Positive Crankcase Ventilation Valve
      California emissions
    Oil Filter, Engine
    Fluid - A/T
      Change fluid and filter, adjust bands.
    Air Injection Filter
    Air Filter Element
      Also clean air filter wrapper (if equipped).
Clean/Repack
    Wheel Bearing
      Inspect and lubricate front wheel bearings. Also service when replacing disc pads. Clean and repack front spindle needle bearings.