Window Glass: Adjustments

1. Remove the door trim and waterproof film.
2. Raise the door glass fully, and then adjust the following items so that the door glass fits evenly into the window glass run channel all the way around.
a. Loosen the roller guide mounting bolts, and then the slant of the glass in the front-to-back direction.





b. Lower the door glass until the holder reaches the access hole, loosen the door glass holder mounting bolts, and then adjust the front-to-back position of the glass.
c. Loosen the door lower sash mounting bolt, and then adjust in the front-to-back position.