Doors, Hood and Trunk: Technical Service Bulletins

• Recalls
  • Recall 95I001004: Liftgate Latch Defect
  • Recall 95I001008: Liftgate Latch Defect
  • Campaign - Liftgate Latch
    • Overview
    • Service Procedure - 1991 Through 1995 Model Years
      • A. Remove Liftgate Trim Panel
      • B. Replace Latch Assembly
      • C. Adjust the Striker Height
      • D. Install the Liftgate Trim Panel
    • Service Procedure - 1984 Through 1990 Model Years
      • A. Remove Liftgate Trim Panel
      • B. Replace Latch Assembly
      • C. Replace and/or Adjust the Striker Height
      • D. Install the Liftgate Trim Panel
    • Owner Letter
  • Recall 95I001000: Rear Liftgate Latch Opens
• Customer Interest
  • Sliding Door Center Hinge Roller - May Exit the Track
  • Liftgate - Creaking When Closing
• By Symptom
  • Abnormal wear/deterioration
    • Liftgate - Creaking When Closing
  • Customer Interest
    • Sliding Door Center Hinge Roller - May Exit the Track
    • Liftgate - Creaking When Closing
  • Erratic Operation
    • Sliding Door Center Hinge Roller - May Exit the Track
  • Loose
    • Recall 95I001000: Rear Liftgate Latch Opens
  • Recalls
    • Recall 95I001004: Liftgate Latch Defect
    • Recall 95I001008: Liftgate Latch Defect
    • Campaign - Liftgate Latch
      • Overview
      • Service Procedure - 1991 Through 1995 Model Years
        • A. Remove Liftgate Trim Panel
        • B. Replace Latch Assembly
        • C. Adjust the Striker Height
        • D. Install the Liftgate Trim Panel
      • Service Procedure - 1984 Through 1990 Model Years
        • A. Remove Liftgate Trim Panel
        • B. Replace Latch Assembly
        • C. Replace and/or Adjust the Striker Height
        • D. Install the Liftgate Trim Panel
      • Owner Letter
    • Recall 95I001000: Rear Liftgate Latch Opens
• All Technical Service Bulletins
  • Recall 95I001004: Liftgate Latch Defect
  • Recall 95I001008: Liftgate Latch Defect
  • Sliding Door Center Hinge Roller - May Exit the Track
  • Liftgate - Creaking When Closing
  • Campaign - Liftgate Latch
    • Overview
    • Service Procedure - 1991 Through 1995 Model Years
      • A. Remove Liftgate Trim Panel
      • B. Replace Latch Assembly
      • C. Adjust the Striker Height
      • D. Install the Liftgate Trim Panel
    • Service Procedure - 1984 Through 1990 Model Years
      • A. Remove Liftgate Trim Panel
      • B. Replace Latch Assembly
      • C. Replace and/or Adjust the Striker Height
      • D. Install the Liftgate Trim Panel
    • Owner Letter
  • Recall 95I001000: Rear Liftgate Latch Opens