120000 MI or 192000 KM

Lubricate
    Universal Joint, Drive/Propeller Shaft
    Suspension
      Lubricate suspension bushings with fittings.
    Drive Axles, Bearings and Joints
    Ball Joint
       With grease fittings only.
Clean
    Carburetor
      Clean and inspect choke and linkage.
Check
    Power Steering Fluid
      Check fluid level. Also inspect hoses.
    Oxygen Sensor
      Except 88-89 California.
    Fluid - Differential
      Check fluid level.
    Fluid - A/T
      Light Duty Cycle
    Clutch Fluid
      Check fluid level.
    Brake Master Cylinder
      Check fluid level.
Inspect
    Wheel Cylinder
    Vacuum Harness HVAC
      Inspect and replace as necessary.
    Steering and Suspension
    Positive Crankcase Ventilation
      Check/clean crankcase emission system components.
    Ignition Rotor
      Non-California.
    Ignition Cable
      Inspect and replace as necessary.
    Heating and Air Conditioning
    Fuel Tank
    Fuel Supply Line
    Fuel Line Coupler
    Exhaust System
    Emission Control Systems
    Drum Brake System
      Check brake linings and wheel cylinders.
    Distributor Cap
      Non-California.
    Distributor Advance Unit
      Non-California.
    Brake Shoe
    Brake Pad
    Brake Hose/Line
    Air Injection
      Except 85-88 California.
Replace
    Timing Belt
    Spark Plug
    Oil Filter, Engine
      4Wd every 50 hours for off road driving.
    Hoses
      Replace vacuum hoses.
    Fuel Filter
    Fuel Filler Cap
    Fluid Filter - A/T
      2WD vehicles.
    Fluid - Transfer Case
      4wd vehicles.
    Fluid - M/T
    Fluid - A/T
      2WD vehicles. 4WD vehicles only.
    Filters
      Replace vacuum control system solenoid valve air filter.
    Evaporative Emission Control Canister
      Replace if applicable..
    Engine Oil
      If your mileage is less the 7,500 miles a yearly, replace the engine oil filter at each oil change.
    Drive Belt
      Replace water pump and alternator belts.
    Brake Fluid
    Air Filter Element
Clean/Repack
    Wheel Bearing
      Inspect for leaks. Clean, inspect and repack front wheel bearings whenever rotors are removed.
Service or Charge
    Transfer Case
      Change lubricant.
Flush
    Cooling System
      Drain, flush and replace engine coolant.