Brake Drum Removal

BRAKE DRUM REMOVAL
1. Raise vehicle and remove wheel and tire.
2. Remove clip nuts securing brake drum to wheel studs.
3. If drum is difficult to remove, retract brake shoes as follows:
a. Remove rear plug from access hole in support plate.
b. Insert thin screwdriver into access hole and push adjuster lever away from adjuster screw star wheel.
c. Insert Adjusting Tool C-3784, or equivalent, into brake adjusting hole and turn adjuster star wheel to retract brake shoes.
4. Remove brake drum.
5. Inspect brake lining for wear, misalignment, or evidence of leakage from axle or wheel cylinder.