Front Band Adjustment

Fig. 4 Kickdown band adjusting screw location:

1. Loosen locknut and back off nut approximately 5 turns, Fig. 4. Ensure adjusting screw turns freely in transaxle case.
2. Using adjusting screw tightener tool No. C-3380-A and C-3705, torque band adjusting screw to 47-50 inch lbs. If tightener tool No. C-3705 is not used, torque adjusting screw to 72 inch lbs.
3. Back off adjusting screw 2-1/2 turns.
4. Hold adjusting screw in this position and torque locknut to 35 ft-lbs.