Front Door Window Motor: Service and Repair

Power Window Regulator Assembly:

REMOVAL
1. Remove trim panel and door liner. Service and Repair
2. Remove the front door glass. Service and Repair
3. Remove the power window regulator assembly. Power Window Regulator Replacement
4. Drill out the two (2) rivets mounting the power window lift motor to the window regulator.
5. Remove the power window lift motor off of the regulator.



INSTALLATION
1. Position the power window lift motor onto the power window regulator and install two (2) 1/4-20 X 1/2 screws in place of the rivets that were drilled out for removal. Torque the mounting screws to 90 lb-ft (11 Nm).
2. Install the power window regulator assembly. Power Window Regulator Replacement
3. Install the front door glass. Service and Repair
4. Install the door liner and door trim panel. Service and Repair