Timing Belt ServiceSteps (Maintenance Replacement)

ServiceSteps, Maintenance Timing Belt Replacement

NOTE: Check for associated Technical Service Bulletins (TSB's) prior to starting the job.

1. Perform Initial Test Drive.

2. Check ignition timing and engine vacuum (Initial Checks). Service and Repair

3. Disconnect the battery, remove the front tire, place a fender cover over the radiator (Initial Preparations). Fundamentals and Basics

4. Pre-position crankshaft to #1 TDC compression. Fundamentals and Basics

5. Remove timing belt. Service and Repair
- Removal Tips and Hints. Fundamentals and Basics

6. Inspect cam/crank seals, water pump, and tensioner/idler pulleys (Pre-Installation Inspection).

7. Install timing belt. Service and Repair
- Installation Tips and Hints. Fundamentals and Basics

8. Reconnect battery.

9. Start engine, check the following:
- Ignition timing. Ignition Timing
- Engine vacuum. Fundamentals and Basics
- Abnormal noises/vibrations from timing belt cover.

10. Perform After Repairs Test Drive.

RECOMMENDED PARTS:
Fundamentals and Basics

RECOMMENDED TOOLS:
Tools and Equipment

ENVIRONMENTAL AND SAFETY CONCERNS:
Technician Safety Information