Air Bag Systems: Service Precautions

If replacing a deployed airbag, wear gloves and eye protection. There will be deposits on and around the airbag that will cause skin and eye irritation. If material does come in contact with the body, flush with cold water.
1. Place tape over airbag exhaust vent.
2. Remove airbag and module from vehicle as outlined in previous procedure.
3. From outside vehicle, use vacuum to remove residual powder from interior, heater and A/C outlets.
4. Run blower motor on low, then vacuum any additional powder.
5. Place deployed airbag module in plastic bag before disposing of.