Transmission and Drivetrain: Technical Service Bulletins

• Customer Interest
  • TPS - Poor/Erratic Engine Performance/AT Hunting
  • M/T - Cyclic Groaning Noise at Low Rpm
    • Overview
    • Parts Required:
    • Repair Procedure:
    • Time Allowance:
  • M/T - Groaning Noise Below 1,400Rpm
  • A/T - Delayed Gear Engagement After Start Up
  • A/T - A500 and A518, 3-4 Upshift/Downshift Rattle Noise
  • A/T - Driveline Clunk on 4-3 Downshift
• By Symptom
  • Abnormal wear/deterioration
    • TPS - Poor/Erratic Engine Performance/AT Hunting
  • Customer Interest
    • TPS - Poor/Erratic Engine Performance/AT Hunting
    • M/T - Cyclic Groaning Noise at Low Rpm
      • Overview
      • Parts Required:
      • Repair Procedure:
      • Time Allowance:
    • M/T - Groaning Noise Below 1,400Rpm
    • A/T - Delayed Gear Engagement After Start Up
    • A/T - A500 and A518, 3-4 Upshift/Downshift Rattle Noise
    • A/T - Driveline Clunk on 4-3 Downshift
  • Erratic Operation
    • TPS - Poor/Erratic Engine Performance/AT Hunting
  • Hard Shifting
    • A/T - Driveline Clunk on 4-3 Downshift
  • Hunting-Surging
    • TPS - Poor/Erratic Engine Performance/AT Hunting
  • No shift/Incorrect gear engagement
    • A/T - Slipping or No-Shift/Metal Sealing Rings
  • Noise
    • M/T - Cyclic Groaning Noise at Low Rpm
      • Overview
      • Parts Required:
      • Repair Procedure:
      • Time Allowance:
    • M/T - Groaning Noise Below 1,400Rpm
    • A/T - A500 and A518, 3-4 Upshift/Downshift Rattle Noise
    • A/T - Driveline Clunk on 4-3 Downshift
• All Technical Service Bulletins
  • TPS - Poor/Erratic Engine Performance/AT Hunting
  • M/T - Cyclic Groaning Noise at Low Rpm
    • Overview
    • Parts Required:
    • Repair Procedure:
    • Time Allowance:
  • M/T - Groaning Noise Below 1,400Rpm
  • A/T - Delayed Gear Engagement After Start Up
  • A/T - A500 and A518, 3-4 Upshift/Downshift Rattle Noise
  • A/T - Erratic Shifting
  • A/T - Engine Vacuum Testing
  • A/T - How To Use A Pressure Gauge
  • A/T - Intermittent Electrical Problems
  • A/T - Failsafe Modes
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Front Bushing Wear
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Part II
  • A/T - Choosing the Right ATF
  • Getrag G360 Transmission - Parts Availability
  • A/T - Fluid Level Checking
  • A/T - Driveline Clunk on 4-3 Downshift
  • Steering/Suspension - Wheel Hub/Bearing Inspection COLL.