Front Door Window Glass: Service and Repair

GLASS REMOVAL
1. Remove the door trim panel (or, if applicable, the access panel) and the waterdam.

Window Glass, Seals, And Channel:

2. Remove the beltline weatherstrip seals.

Vent Window:

3. Lower the glass to the full open position and remove the vent window.

Glass Channel & Regulator:

4. Slide the glass forward until the channel separates from the window regulator arm roller.
5. Remove the glass and channel from the door.

GLASS INSTALLATION
1. Lubricate the glass channel.
2. Position the glass and channel in the door.
3. Slide the glass rearward and engage the channel with the regulator arm roller.
4. Install the vent window. If necessary, refer to the installation procedure. Raise the glass to the full closed position.
5. Install the beltline weatherstrip seals.
6. Install the door waterdam and the trim panel, or, if applicable, the access panel.