Using Scan Tool

Fig. 16 Diagnostic Link Connector:

USING SCAN TOOL
On 1992 models, connect a suitable scan tool to the Diagnostic Link Connector (DLC) located on the LH side of engine compartment near Powertrain Control Module then follow scan tool manufacturer's instructions to access the DTCs.

Refer to test procedures to locate failed component or perform recommended repair.

Using Scan Tool

Fig. 16 Diagnostic Link Connector:

Fig. 18 Test DR-26A: Radiator Fan Relay Circuit (Part 1 Of 2):

Fig. 18 Test DR-26A: Radiator Fan Relay Circuit (Part 2 Of 2):

Fig. 19 Test DR-34A: intermittent Test For Relays & Solenoids: