Coolant Temperature Sensor/Switch (For Computer): Service and Repair

WARNING: HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.

Coolant Temperature Sensor Location:

REMOVAL

1. Partially drain cooling system.

2. Disconnect electrical connector from sensor.

3. Remove sensor from intake manifold.

INSTALLATION

1. Install sensor.

^ Tighten to 27 Nm (20 ft. lbs.) torque.

2. Connect electrical connector to sensor.

3. Replace any lost engine coolant.