Vehicle Speed Sensor: Service and Repair

NOTE:
The vehicle speed sensor is located on the extension housing of the transmission on 2WD models. It is located on the transfer case on 4WD models.


REMOVAL

1. Raise and support vehicle.

2. Disconnect the electrical connector from the sensor.

3. Remove (unscrew) the speedometer cable from the sensor.

4. Loosen the sensor mounting nut.

5. Remove the sensor.


INSTALLATION

1. Install new sensor into speedometer adapter.

2. Tighten sensor mounting nut.

3. Connect electrical connector to sensor.

4. Connect the speedometer cable.

5. Lower the vehicle.