Overrunning Clutch, Rear Band and Low-Reverse Drum

1. Install overrunning clutch components if not yet installed.





2. Position rear band and link in case.





3. Install low-reverse drum. Slide drum through rear band, onto piston retainer hub and into engagement with overrunning clutch and race.





4. Install thrust washer in low-reverse drum spot-face. Use petroleum jelly to hold washer in place.
5. Install snap ring that secures low-reverse drum to piston retainer hub.





6. Insert band reaction pin part way into case and band link.





7. Install rear band adjusting lever, reaction lever, and strut. Be sure levers and strut are aligned and engaged before seating band reaction pin in case.