With Rear Wheel Antilock System

RWAL Control Module Mounting:

1. On models less A/C, proceed as follows:
a. From under instrument panel, remove brake module attaching screws, then disconnect module electrical connector.
b. Remove module.
c. Reverse procedure to install. Torque attaching screws to 21 in lb.
2. On models with A/C, proceed as follows:
a. Remove glove box, then the brake module attaching screws.
b. Disconnect module electrical connector then remove module.
c. Reverse procedure to install. Torque attaching screws to 21 in lb.