Manual Window Regulator Replacement

*** THIS ARTICLE HAS BEEN UPDATED BY TSB # 23-29-93 DATED JUNE 4, 1993

Front Door Power Regulator:

REMOVAL
1. Remove trim panel and door liner. Service and Repair
2. Remove the front door glass. Service and Repair
3. Remove the mounting bolts holding the manual regulator to the inner door panel.
4. Disengage the push-in fastener holding the regulator cables to the inner door panel.
5. Remove the manual window regulator from the door.



INSTALLATION
1. Install the manual window regulator into the door.
2. Install the push-in fastener holding the regulator cables to the inner door panel.
3. Install the mounting bolts that hold the manual regulator to the inner door panel.
4. Install the front door glass. Service and Repair
5. Install the door liner and door trim panel. Service and Repair