Power Window Regulator Replacement
*** THIS ARTICLE HAS BEEN UPDATED BY TSB # 23-29-93 DATED JUNE 4, 1993Front Door Power Regulator:
REMOVAL
1. Remove trim panel and door liner. Service and Repair
2. Remove the front door glass. Service and Repair
3. Disconnect the battery negative cable.
4. Disconnect the power window motor electrical connector. Disengage push-in fastener holding regulator wiring harness to inner door panel.
5. Remove the mounting bolts holding the power regulator to the inner door panel.
6. Disengage the push-in fastener holding the regulator cables to the inner door panel.
5. Remove the power window regulator from the door.
INSTALLATION
1. Install the power window regulator into the door.
2. Install the push-in fastener holding the regulator cables to the inner door panel.
3. Install the mounting bolts that hold the power regulator to the inner door panel.
4. Connect the power window motor electrical connector and the fastener that holds the wiring harness to the inner door panel.
5. Connect the negative battery terminal.
4. Install the front door glass. Service and Repair
5. Install the door liner and door trim panel. Service and Repair