Front Door: Service and Repair

Front Door:

FRONT DOOR REMOVAL
1. Remove door trim panel, silencer pad, and water shield.
2. Disconnect all wire connectors and wire harness hold downs inside door and push wire harness through access hole in front of door into hinge pillar opening.
3. Open door and support door on a suitable lifting device.
4. Drive bottom hinge pin upward and remove pin from hinge.
5. Drive top hinge pin downward and remove pin from hinge.
6. Separate door from vehicle.

FRONT DOOR INSTALLATION
Reverse the preceding operation. The door should not require re-alignment. If door does need alignment, refer to Front Door Hinge/Service and Repair.