State Display Sensors

DESCRIPTION
The output of these sensors are quantities displayed as a measured value in the appropriate units. Voltage, pressure, temperature, time, and speed are examples of these values. The scanner displays them as numbers that vary through a range of values in specific units, such as voltage (v), pounds per square inch (psi), kilopascals (kPa), degrees Celsius (°C), degrees Fahrenheit (°F), or miles per hour (mph). Connect the scan tool to the vehicle and access "State Displays" then, access "Sensors".


STATE DISPLAY SENSORS
- Adaptive Fuel Factor
- Added Adaptive Fuel Factor
- AIS Motor Position
- Barometric Pressure
- Battery Temperature
- Battery Voltage
- Charge Temperature (Air/Fuel)
- Charge (MAT) Temperature Sensor
- Charging System Goal
- Coolant Temperature
- Coolant Temperature Sensor
- Engine Speed
- Fault #1 Key-On Info
- Fault #2 Key-On Info
- Fault #3 Key-On Info
- MAP Gauge Reading
- MAP Sensor Reading
- MAP Sensor Voltage
- Minimum Throttle
- Minimum Air Flow Idle Speed
- Module Spark Advance
- Oxygen Sensor Signal
- Oxygen Sensor State
- Throttle Opening
- Throttle Position
- Total Spark Advance
- Vehicle Speed