First Rear Seat Assembly

REAR SEAT ASSEMBLY REMOVAL
1. Lift the release latch handle on both sides until the front of the seat assembly is released from the floor pan strikers.
2. Tilt the seat rearward.
3. With the aid of an assistant remove the seat from the vehicle.
4. Reverse this procedure to install and be sure to close the release latches completely.

FIRST REAR SEAT RISER
Removal
1. Remove the seat from the vehicle.
2. Remove the riser covers.
3. Detrim the seat as necessary.

First Rear Seat Assembly:

4. Unbolt the riser from the frame.
5. Reverse this procedure to install and torque the seat riser to frame bolts as follows:
a. The front bolts are torqued to 28 Nm (250 In. Lbs.).
b. The rear bolt is torqued to 176 Nm (130 Ft. Lbs.).

FIRST REAR SEAT ARMREST
Folding Armrest Removal
1. Lift armrest to a position midway between full up and full down; Remove the armrest.

Stationary Armrest Removal

First Rear Seat Assembly:

1. Unbolt and remove the armrest cover.
2. Unbolt and remove the armrest.
3. Reverse this procedure to install.