Turn Signals: Description and Operation

NOTE: The following information is intended to be used in conjunction with the electrical diagrams.

CIRCUIT OPERATION
In the ACCESSORY or RUN position, the ignition switch connects circuit Al from fuse C in the Power Distribution Center (PDC) to circuit A31. Circuit A31 feeds circuit L5 through fuse 11 in the fuse block.

Circuit L5 powers the turn signal flasher. Circuit L6 from the flasher connects to the multi-function switch to supply power to the turn signals. The multi-function switch connects to the turn signal and side marker lamps on circuits L60, L61, L62 and L63.


RIGHT TURN SIGNAL
When the operator selects the right turn signal, the multi-function switch connects power from circuit L6 to circuits L6O and L62. Circuit L62 feeds the right rear turn signal/hazard flasher/stop lamp.

Circuit L6O feeds the right front turn signal/hazard flasher lamp and side marker lamp. Circuit L6O also splices to power the turn signal indicator lamp on the instrument cluster.


LEFT TURN SIGNAL
When the operator selects the left turn signal, the multi-function switch connects power from circuit L6 to circuits L61 and L63. Circuit L63 feeds the left rear turn signal/hazard flasher/stop lamp.

Circuit L61 feeds the left front turn signal/hazard flasher lamp and side marker lamp. Circuit L61 also splices to power the turn signal indicator lamp on the instrument cluster.